One Channels Controller Module With Transformer JZH-RF005
Main Specifications 1. working voltage: 12V + 0.5V 2.working current: ≤ 3mA 3. working temperature: -250C-650C 4. receiving sensitivity: -100dBm 5.working frequency: 315MHZ 6. the output voltage: straight optional 7.output current: ≤ 10A
study method: Press the learning button, the learning light is on, press any button on the remote control, and the learning light flashes a few times to indicate that the learning is successful. You can learn up to three remote controls. If you press and hold the learning button for about 8 seconds, the light will be on to remove all remote controls.
Motor control instructions: 1. Remote control: After successful learning, press the symbol of “ Regular triangle” on the remote control to control the forward rotation of the motor; the “Inverted triangle ” symbol controls the motor to reverse. The “quadrilateral ” symbol indicates stop.
2.manual control: The control panel is marked with the characters “DOWN, UP, STOP, K1, K2, GND”, which indicate the forward rotation, reverse rotation, stop, forward rotation stroke switch and reverse rotation stroke switch of the motor. As long as each point is shorted to ground, the motor can be controlled. When the motor is running, it will automatically stop when it touches the travel switch. If the motor is reversed during the forward rotation, the motor will stop for one second and then reverse. Note: “NO” means the normally closed end; “NC” means the normally open end; “COM” means the common end.